macbook pro on brown wooden table

In terms of accessing the internet at lightning speed it is safe to trust the Netgear extender. It is the Netgear Wireless Range Extender boosts the wireless signals that are emitted by your router. It also provides high-speed internet. It will not buffer while watching online videos as well as playing games. However, there are times when users complain about slow WiFi. If you’re having the same issue, we’re here to assist you. In this post we will go over the cause and solutions to troubleshooting the issue with the slow internet speed on the extender from Netgear. Also, keep reading.


Fixed: Slow WiFi on Netgear Extender


  1. Reboot Your Netgear Extender

What was the last time that you restarted your extender? Most likely, it was a long time back! This is the reason you’re experiencing slow internet speed for the Netgear Wireless range extender. In order to fix this issue, and without delay restart the WiFi device.

Follow the steps listed below to restart the device. Netgear Wireless range extender.

  • Remove your WiFi-enabled devices from the extender, then disconnect your wall outlet.
  • The wireless extender should be without power for a time.
  • After that then plug it to the wall socket, and turn on the Power button.

Check whether the issue has resolved. If it’s not resolved, proceed to the next step in the troubleshooting process.


  1. Relocate Your Extender

When performing the setup of your Netgear extender, the setup is advised to place it in the correct position. If you notice that the WiFi isn’t working on your extender, the chances are you’ve put it in the wrong place. Maybe you’ve placed it under the table or in cabinets. Then, you must move your WiFi device, and be sure to consider the following factors to consider when doing this:

  • Install your Netgear extender next to your WiFi router. The proximity will allow it to be simple for the extender’s sensor to detect the WiFi signals that are coming from your router at home.
  • Do not place the wireless extender at a corner, or close to an unfinished wall.
  • Make sure to not put your WiFi device within a distance of electronics, reflective surfaces or metal objects. Also, avoid placing it near Bluetooth devices. This will ensure that there’s no interference to the extender’s WiFi signals.
  • Make sure to keep the Netgear wireless range extender inside a cooler, well-ventilated space to avoid overheating.

  1. Connect Your WiFi Devices Properly

Connecting the extender properly does not produce any results? It appears that the extender and router have not been connected in a proper manner. While you are able to connect both devices wirelessly, the connection is not strong. Thus, take the Ethernet cable and replace the wireless connection by using it. Secure the connection with your finger, and then check to see whether you can tell if the Ethernet cable is safe or not.


  1. Perform Netgear Extender Firmware Update

Did the above troubleshooting techniques not increase the speed of your WiFi? It appears that you didn’t upgrade the firmware on the WiFi router. No worries! It’s easy to do this with these steps:

  • Switch on the Netgear wireless extender, and let the LED lights shine bright green.
  • Connect the router and wireless extender with the Ethernet cable.
  • Once you’re done, turn to your computer and open the web browser.
  • Download an update to the firmware of the wireless range extender you have purchased and place it in the location you want it to be on your computer.
  • After that, open a brand new tab and enter 192.168.1.25 in the address bar.
  • Enter to enter. Enter key.
  • You will be asked to sign into the account associated with your Netgear Wireless Range Extender.
  • Also, consult the Netgear user manual , and enter your default password and username for your device into the appropriate fields.
  • Click Log In.
  • Notice:If you are facing issues when trying to access 192.168.1.250 then you should use mywifiext instead of mywifiext to connect on your device from Netgear.
  • The wizard for setting up extenders will show up.
  • Go to the Other Settings page, and then click on the Firmware Update option.
  • Navigate the firmware file you downloaded.
  • Once you have found it Click the upload button.
  • When you upload your file to the server, the firmware update process begins.

The update will solve the problem for you . You can then connect any WiFi-enabled device via the extender’s Netgear_extand experience uninterrupted internet access.


In the Nutshell

A slow connection to WiFi could cause a halt to your vital internet-related tasks. It is therefore essential to fix the problem. We are hoping that by using the troubleshooting techniques provided in this article you’ll be able to boost the WiFi speed of the Netgear Wireless range extender.

 

Leave a Reply

Your email address will not be published.